EasyManua.ls Logo

DieHard 71326 - User Manual

DieHard 71326
28 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
0099002230-00
CAUTION:
Read and follow all safety
rules and operating instructions
before every use of this product.
SAVE THESE INSTRUCTIONS.
ATENCIÓN:
Lea y siga todas las reglas
de seguridad e instrucciones de uso
antes de cada uso de este producto.
GUARDE ESTAS INSTRUCCIONES.
Model
71326
Automatic Battery Charger
& Engine Starter
Cargador de batería automático
y arrancador
AC Input: 120V AC, 60 Hz, 14.5A Int.
DC Output: 6V/12V DC
6V: 2A Cont., 30A<>12A Int. 12V: 6A<>2A, 30A<>12A, 80A Int.
Owner’s Manual / Manual del Propietario

Table of Contents

Questions and Answers

  • K
    Kelly RowlandJul 25, 2025
    What to do if engine start does not work on DieHard Automobile Battery Charger?
    • B
      Becky JohnsonJul 25, 2025
      If the engine start function isn't working on your DieHard Automobile Battery Charger, it could be due to several reasons. You might be drawing more current than the Engine Start rate allows, resulting in a shorter crank time. Also, ensure you wait the full 3 minutes (180 seconds) between cranks, until the display shows 'rdy'. Overheating can also cause this issue, so check that the charger vents are not blocked and allow it to cool. If the battery is severely discharged, using the Boost rate for 10-15 minutes before attempting to crank can help.
  • K
    Kenneth JenkinsAug 8, 2025
    Why DieHard 71326 Automobile Battery Charger will not turn on?
    • S
      Sheri GordonAug 8, 2025
      If your DieHard Automobile Battery Charger won't turn on even when properly connected, there are a few potential causes. First, the AC outlet you're using might be dead, so check the fuse or circuit breaker. Second, there could be a poor electrical connection; inspect the power cord and any extension cords for loose plugs. Finally, the battery itself may be defective and should be checked.

Summary

DieHard Automatic Battery Charger Safety

General Safety Precautions

Essential safety instructions and precautions for operating the battery charger, including warnings about explosive gases.

Personal Safety Precautions

Battery Charging Steps

Charging with Battery Installed in Vehicle

Detailed steps for connecting and charging a battery while it remains installed in the vehicle.

Charging with Battery Outside Vehicle

Procedure for safely charging a battery that has been removed from the vehicle.

Operating Modes and Features

Automatic and Manual Charging Modes

Engine Start Feature Usage

Instructions and precautions for using the engine start feature to jump-start a vehicle.

Troubleshooting

Error Codes and Solutions

Explanation of error codes displayed by the charger and their corresponding reasons and solutions.

Common Operational Problems

DieHard 71326 Specifications

General IconGeneral
Battery Voltage6V/12V
Maintain/Trickle ChargeYes
Boost ModeYes
Battery TypeStandard, AGM, Gel
Automatic ShutoffYes
Reverse Polarity ProtectionYes
Digital DisplayYes
Charger TypeAutomatic
Charging Amperage2A/10A
Engine StartYes

Related product manuals