EXPORT: Export the binary image of the EEPROM memory on a USB
key. The file name will be: nnnn_EEP.BIN, where nnnn is the serial
number of the instrument.
IMPORT: Import a binary image of the EEPROM from a file located on
a USB key. The file will be imported only if its name includes the same
Serial Number of the instrument (see EXPORT function).
WARNING: The Import operation will overwrite all the calibrations: i.e.
temperature setting and motor home position.
Using a special rack (i.e. Pan flute), it was possible to check the accuracy
of the bottom level measurement and to adjust it by setting an offset
value.
Note: this check is no longer performed, therefore this functionality is
no longer used.
To Next Page
Loading...
