Digi 001 Quick Start Guide28
Footswitch Jack
This connector allows you to connect a footswitch that can be used for control of
QuickPunch audio punch-in and punch-out features in Pro Tools LE, and for MIDI punch-
in and punch-out recording with Pro Tools LE. Both continuous on/continuous off and
instantaneous on/off pedals with a 1/4" TRS connector are supported. See “Recording with
a Footswitch” on page 72 for more information.
Monitor Inputs (Analog Inputs 3–4)
These connectors are used to connect analog audio sources 3–4, or to connect a stereo
source such as a CD player, synth, or cassette deck to monitor when using the Digi 001 I/O
Box in Monitor Mode. In Monitor Mode, input 3 is routed to the Left output and input 4
is routed to the Right output. These connectors are balanced, 1/4" TRS jacks.
Analog Inputs 3–8
These inputs are used to connect analog audio sources that are routed to Analog Inputs 3–8.
These are balanced, 1/4" TRS jacks for analog audio input connections. These analog inputs
feature 24-bit analog-to-digital converters.
Monitor Outputs
These outputs can be connected to powered speakers, a stereo power amp, or another
stereo destination to monitor your mix. The monitor outputs play the audio that is routed
to analog outputs 1 and 2. Analog output 1 material is routed to the left monitor output,
and analog output 2 material is routed to the right monitor output. These analog outputs
feature 24-bit digital-to-analog converters. You can control the output level of the monitor
outputs with the Monitor Volume control. These connectors are balanced, 1/4" TRS jacks.
Main Analog Outputs 1–2
These main outputs play the audio that is routed to analog outputs 1–2. These outputs can
provide left and right outputs to a tape deck for mixdowns, or to another stereo
destination. These analog outputs feature 24-bit digital-to-analog converters. These
outputs are balanced, +4 dBu line level. The connector type is 1/4" TRS.
Analog Outputs 3–8
These outputs play the audio that is routed to analog outputs 3–8. These analog outputs
feature 24-bit digital-to-analog converters. These outputs are unbalanced, –10 dBu line
level. The connector type is 1/4" TRS.
To Next Page
Loading...
