EasyManua.ls Logo

DigiPos WD-2030 User Manual

DigiPos WD-2030
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Vacuum Fluorescent
Customer Display
Model: WD-2030 XXXX
Version: 1.2

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the DigiPos WD-2030 and is the answer not in the manual?

DigiPos WD-2030 Specifications

General IconGeneral
Resolution1600 x 900
Aspect Ratio16:9
Response Time5ms
Brightness250 cd/m²
Contrast Ratio1000:1
Input ConnectorsVGA, DVI
Display Size20 inches
Viewing Angle170°/160°
Power Consumption25W (typical)

Summary

Product Features

Display and Character Capabilities

Covers 20x2 display, color, adjustability, user-defined characters.

Connectivity and Power

Details USB interface, pass-through, and power input options.

Command Emulation Support

Lists supported command emulation modes and DIP switch functions.

General Product Specifications

Display Method and Size

Specifies display method, character count, font, and size.

Display Module Interface Details

RS232 Interface Specifications

Details data transmission, handshaking, signal levels, and baud rates.

USB Interface Specifications

Covers USB data transmission, synchronization, and signal levels.

Base PCB Interface Connections

Power Supply Connector Options

Describes power input options via DC jack and miniature jacks.

DIP Switch Configuration Settings

Command Emulation Mode Selection

Configures the display's command emulation mode using DIP switches.

Baud Rate and Parity Configuration

Sets communication baud rate and parity check options via DIP switches.

Command Set Reference Guide

CD5220 Standard Command List

Lists commands for CD5220 standard mode operation.

Character Set Displays and Pages