8.2 UTC standard mode command list
Command Code (hex) Function description
EOT n 04 n
Display Dimming
n = 20h, 40h, 60h, FFh
BS 08 Back space
HT 09 Horizontal tab
LF 0A Line feed
CR 0D Carriage return
DLE 0F Display position
DC1 11 Over write display mode
DC2 12 Vertical scroll mode
DC3 13 Cursor on
DC4 14 Cursor off
CAN 18 Clear to end of line
EM 19 Clear to end of display
FS 1C Flashing text start
GS 1D Flashing text end
US 1F Reset display
RS 1E Home and clear display
ESC d 1B 64 Change to UTC enhanced mode
Table 8-4
To Next Page
Loading...
