Digisol DG-GS4900SE Series User Manual

DG-GS4900SE Series Installation Guide
18

Do not drop metals into the switch. It can cause short-circuit.
 Do not touch the power plug and power socket.
 Do not place the tinder near the switch.

Do not configure the switch alone in a dangerous situation,
 Use standard power sockets which have overload and leakage protection.
 Inspect and maintain the site and the switch regularly.

Have the emergence power switch on the site. In case of emergence, switch off the
power immediately.
Caution!
Potential risk include: Electric leakage, Power supply arcing, Power line breakage,
Imperfect earth, Overload circuit and Electrical short circuit.If electric shock, fire, electrical
short circuit occurs, please cut off the electricity supply and alarm rapidly. Rescue the
injured person in the contingency under inherently safe, give the injured person proper
first aid treatment according to the injury state, and seek help from the Medical
Emergency using various ways.
2.2 Installation Preparation
2.2.1 Verify the Package Contents
Please unpack the shipping package and verify carefully the contents inside.
2.2.2 Required Tools and Utilities
The required tools and utilities are shown below:

Cross screwdrivers
 Flat-blade screwdriver
 ESD wrist strap

Antistatic uniform

Digisol DG-GS4900SE Series Specifications

General

Brand	Digisol
Model	DG-GS4900SE Series
Category	Switch
Language	English