Digital-Ally FirstVu HD - Data Transfer

Digital Ally, Inc. | Device Conguration using VuVault
3-5
FirstVu HD Operation Guide | 860-00177-00 Rev J
Go Back To Table of Contents
Audio Mode
The audio mode determines how audio will be recorded to your device. If Enabled,
audio information is recorded during the recorded event and during the congured
Pre-Event time.
If you select Enabled (w/o Pre-Event), audio will be recorded during the event but not
recorded during Pre-Event. If Audio Mode is Disabled, no audio will be recorded.
Settings: Enabled [default], Disabled, Enabled (w/o Pre-Event)
Frames Per Second
This parameter sets the number of frames per second the FirstVu HD will record. The
higher the setting, the better the video quality, and the larger the size of the video les.
Settings: 5 FPS, 10 FPS, 15 FPS, 30 FPS [default]
Vibrate Record
Select the number of seconds between vibrations while the FirstVu HD is recording. If set
for 0 seconds, the vibrate function will be disabled.
Settings: 0-600 seconds [default = 10 seconds]
VuLink
®
Setting
Set VuLink
Select a VuLink
®
device serial number for use with your FirstVu HD. A VuLink
®
wireless
link is required (see the “VuLink Operation and Installation Guide”, or contact Digital Ally
Technical Support for more information).
VuVault GO
®
Setting
Set VuVault GO
Use this eld to enable the device to work with the VuVault GO
®
mobile application.
Data Transfer
Secure USB Port
This parameter determines if the USB port for secure data connections to a PC is
enabled or disabled. This feature provides greater security to your recorded evidentiary
data.
When Secure USB Port is enabled, it is impossible to view, edit, or delete les present
on your FirstVu HD using a normal Windows computer which does not have VuVault
®
installed. Video and metadata les can only be accessed when using the upload
function within your VuVault
®
stand-alone or networked environment.
VuVault
®
creates a proprietary encryption key to restrict access to your FirstVu HD
les when in secure mode. The only user-accessible information when the device is
connected to a PC USB port on a normal Windows computer is the dvminfo.log le. The
dvminfo.log le contains basic information about your device such as serial number
and rmware version.
When Secure USB Port is disabled, video and data les will be accessible to any user
when the device is plugged into a PC USB port. Event data can then be copied, erased,
or uploaded with or without the use of VuVault
®
.
Settings: On, O [default]
Once the desired settings have been entered, click
and proceed below
to activate your device.