DigiTech BP-8 Valve - BP-8 Valve Control Functions; Key Control Buttons and Levels

reduce the Input Level using the Input Level knob. To reduce digital clipping, the Preamp on/off levels, EQ, and/or Effects levels should be
checked and adjusted accordingly. As always, let your ears be the judge.
• Store - Lights when a Parameter has been changed in a Program. (see page 9, under Store mode for further information on storing a
Program).
4) Value, Store and Edit Buttons - The Value <UP> and <DOWN> buttons allow you to scroll through the BP-8 Valve’s Programs, or
change Parameter values in Edit mode. The <STORE> button allows you to store an edited program in memory, or copy a program to
another User Program location for later use. The <EDIT> button enters Edit mode and allows you to edit the User and Factory programs.
5) Parameter Select Buttons -The <LEFT> and <RIGHT> Parameter Select buttons allow you to navigate the horizontal Effect LEDs of the
Parameter matrix. The <UP> and <DOWN> Parameter buttons allow you to navigate the vertical parameter LEDs of the Parameter matrix.
These keys are only active in Edit mode.
6) Input level - Controls the strength of the instrument signal into the BP-8 Valve.
7) Output Level - Controls the overall output level of the BP-8 Valve, as well as the overall level of the headphones.
8) Expression Pedal - This volume-type pedal allows real time control over Parameters in the BP-8 Valve.
Section 1 Introduction
BP-8 Valve
User Guide
4