Mod/Pitch Effects
The Mod/Pitch effect section in the BP-8 Valve allows you to select effects such as: Chorus, Flanger, Phaser, Tremolo, Panner, Pitch Shift,
Whammy™ (Bend), Fretless, Octabass, and Envelope Filter. The Parameters of these effects are adjusted in this module.
On / Bypass Turns the Module on or off.
Type Allows you to select a specific type of modulation/pitch effect. The Types are: Chorus, Flanger, Phaser,
Tremolo, Panner, Pitch Shift, Whammy™ (Bend), Fretless, Octabass, and Envelope Filter.
Level Controls the overall mix level of the mod or pitch shifting effect. Ranges from 0 to 100.
The BP-8 Valve offers a chorus that is unique in both character and sound. This dual chorus offers exceptionally rich chorusing using multiple
voices with different phasing characteristics. Chorus Parameters are as follows:
Speed Controls the speed of the chorus sweep. Ranges from 0 to 100.
Depth This Parameter sets the sweep depth (intensity) of the chorus. Ranges from 0 to 100.
Delay Sets the amount of delay present in the chorus effect. Ranges from 0 to 100.
The BP-8 Valve also offers exceptionally rich studio-quiet flanging. Flange Parameters are as follows:
Speed Controls the speed of the flange sweep. Ranges from 0 to 100.
Depth Sets the depth amount and delay present in the flange effect. Ranges from 1 to 16.
Regeneration This Parameter sets the amount of regeneration which is perceived as the sweep depth (intensity) of the
flange. Variable from -99 to 99.
To Next Page
Loading...
