The BP-8 Valve’s Pitch Shifting effect gives you a shifted signal from 0 to 24 semi-tones above or below the pitch of the input signal.
Amount Sets the interval between the original note and the pitch shifted note. Variable from -24 to 24
Detune Determines the amount of detuning applied to the shifted note. Variable from -99 to 99.
The BP-8 Valve’s Whammy™ pitch bending effect allows you to smoothly shift between two preset pitch intervals using the Expression
Pedal. *
Amount Selects the function of the Whammy™ Module. There are 16 functions available in regular Whammy
Modules. They are as follows:
Whammy Harmony (Dry Signal Added)
Octave Up=OcUP Octave Up/Octave Down=OuOd
2nd Up=2ndU Octave Down/4th Down=Ou4d
2nd Down=2ndd 4th Down/3rd Up=4d3u
4th Down=4thd 4th Up/5th Up=4u5u
Octave Down=OcUP 5th Up/6th Up=5u6u
5th Up/Octave Up=5uOu
Detune=detn
Whammy The Whammy Parameter reflects the current setting of the Whammy™ effect. As this parameter is
modified, the pitch of the original note will change in intervals according to the setting of the Amount
parameter. Ranges from 0 to 100.
* To link the Whammy function to the Expression Pedal, see instructions on page 14.
To Next Page
Loading...
