DigiTech JAMMAN STEREO User Manual

recorded will be recorded as a loop phrase. Loop phrases can be
converted to Single phrases and vice versa. The Loop LED will also
flash during processes where the internal memory or optional SD
memory is being accessed (loading a loop, Time Stretching, or store/
copy procedure).
Single
This yellow LED indicates the current phrase memory is set to
playback only once when play is initiated. Single phrases can be
converted to Loop phrases and vice versa. The Single LED will also
flash during processes where the internal memory or optional SD
memory is being accessed (loading a loop, Time Stretching, or store/
copy procedure).
Card Mem
This red LED is lit when you are selecting loop memories on the
optional SD/SDHC memory card. When this LED is off, loops are
being selected from the JamMan
®
Stereo’s internal memory.
Display4.
The Display shows the currently selected loop memory location. It
also shows information during store/copy procedures, during Time
Signature and Rhythm Type setup, file deletion, and card formatting
procedures.
Select Knob5.
The Loop Select knob is used for selecting different loop memories
and making selections when in other modes (such as Time Signature
and Rhythm Type).
11
Guided Tour - Front Panel

DigiTech JAMMAN STEREO Specifications

General

Type	-
Bit rate	24 bit
Proper use	DJ
Sample rate	44.1 kHz
Product color	Blue
Power consumption (typical)	9 W

Weight and Dimensions

Depth	173.73 mm
Width	170.18 mm
Height	73.4 mm
Weight	1006 g