Mic Input1.
Connect a microphone here. The mic input accepts low impedance
dynamic or self-powered condenser microphones. The mic input is
recorded to both left and right channels of a loop recorded in the
JamMan
®
Stereo.
Left (Mono) and Right Outputs2.
Connect the Left (Mono) output to the input of a guitar amplifier,
mixer channel, another pedal’s input, or amp effects return.
Connect the Right output to the input of a second guitar amplifier
when a second amp is being used or to a second mixer channel.
Left (Mono) and Right Inputs3.
Connect your instrument, another pedal’s output, or an amp effects
send to the Left (Mono) input jack. Signals are heard at both outputs
when only the Left (Mono) jack is used.
Guided Tour - Rear Panel
To Next Page
Loading...
