DigiTech JAMMAN STEREO User Manual

15
Loop Down Footswitch16.
This footswitch selects the next lower loop memory. Press and hold
this footswitch to scroll quickly through internal and optional SD
card memories.
Reverse (Rhythm Type) Button17.
Press this button to make the recorded loop phrase play back in
reverse.
Press this button while the Shift button is lit to change the Rhythm
Type. Turn the Loop Select knob to change the active rhythm guide
track. You can hear the different rhythm types as they are selected
only if Rhythm Level is turned up and a loop is playing or when a
tempo is being set in an empty phrase memory (see page 48).
Store (Delete) Button18.
Press to store/copy changes made to a memory location. This
button will light when a change has been made indicating the change
must be stored for later recall. Changes that are not stored will
be lost when a different loop is selected or the JamMan
®
Stereo is
turned off. Press this button while the Shift button is lit to delete the
contents of the current memory location (see page 50).
Exit (Shift) Button19.
Press this button to exit procedures like Store and Delete or to
to enable and disable the secondary Shift button functions. Shift is
active when this button is lit.
Record/Play/Overdub Status LEDs20.
Indicates which function is active during performance.
Guided Tour - Front Panel

DigiTech JAMMAN STEREO Specifications

General

Type	-
Bit rate	24 bit
Proper use	DJ
Sample rate	44.1 kHz
Product color	Blue
Power consumption (typical)	9 W

Weight and Dimensions

Depth	173.73 mm
Width	170.18 mm
Height	73.4 mm
Weight	1006 g