DigiTech JAMMAN STEREO User Manual

49
Rhythm Type
4
2
3
1 5
99
6
7
Rhythm Output
The Rhythm Output isolates the rhythm guide track from the left and right
outputs and provides a mono mix of the JamMan
®
Stereo’s looped audio.
This is useful for someone like a drummer in the band who needs to follow
a click track but also wants to hear the looped audio. It also prevents the
rhythm guide track from being heard by the audience through an amp or PA
system connected to the left and right outputs. The Rhythm Output does
not pass any of the input signal. Only looped audio, overdubbed audio, and
rhythm guide track will be heard here.
To isolate the rhythm guide track from the main left and right outputs, just
connect a mono TS cable to this output. You can now feed this signal to a
mixer or powered monitor for anyone who needs to use this feature.

DigiTech JAMMAN STEREO Specifications

General

Type	-
Bit rate	24 bit
Proper use	DJ
Sample rate	44.1 kHz
Product color	Blue
Power consumption (typical)	9 W

Weight and Dimensions

Depth	173.73 mm
Width	170.18 mm
Height	73.4 mm
Weight	1006 g