DigiTech JAMMAN - Stop Modes

25
Loop Phrases can be stopped in two ways: Immediately stop when the
STOP/TEMPO footswitch is pressed or finish playing through to the end of
the phrase and stop. These two Stop Modes are called Stop and Finish. To
change Stop Modes, follow these steps:
1. Press the
button. It will now be lit.
2. Press the RECORD MODE button. The two Stop Modes are labeled to the
right of the RECORD MODE LEDs. Select the LED which is labeled with the
Stop Mode you want to use.
3. Press the ExIT button.
4. Press the STORE button twice to store the changes, if desired.
Stop Modes