DigiTech JAMMAN Manual

4
1. Get Connected
or
or
Before powering up your JamMan:
a. Make Connections
1. Connect a guitar or bass to the INSTRUMENT INPUT jack and/or a mic to MIC
INPUT on the JamMan’s rear panel.
2. Connect the JamMan’s OUTPUT to the input of an amplifier, a channel of a
mixer, or to headphones.
b. Connect the Power Supply
1. Start with your amplifier and the JamMan turned off or the mixer faders at
their minimum position.
2. Turn the LOOP LEVEL, RHYTHM LEVEL, MIC LEVEL, and INST LEVEL knobs all
the way down on the JamMan.
3. Connect the PS-0913B power supply to the POWER jack on the JamMan.
4. Connect the other end of the PS-0913B power supply to an AC outlet.
5. Turn your amplifier on and turn up its volume to a normal playing level or
bring up the mixer’s faders to a nominal level.
c. Insert the CompactFlash
®
Card
Insert the included CompactFlash
®
card into the CompactFlash card slot (if
it isn’t already inserted).
Quick Start

DigiTech JAMMAN Specifications

General

Technology	Digital
MIDI	No
Type	Looper
Memory	Internal memory for loop storage
Power Supply	9V DC
Outputs	1 x 1/4" Mono