32
The JamMan has 99 memory locations and at some time you may need to
delete the contents of a memory location so it may be reused. To delete a
loop from a memory location, follow these steps:
1. Press the
button. It will now be lit.
2. Press the
button. This button will now flash waiting for a delete
confirmation. (Press ExIT at this point to abort the Delete procedure.)
3. If you want to delete all contents from this memory location and return
it to its default state, press and hold the
button for two seconds.
The DISPLaY will then read dE indicating the delete procedure is complete.
: Deleting a memory location is irreversible and will erase
any recorded information that resides here. Use the Delete function with
caution.
Deleting Phrases
To Next Page
Loading...
Need help?
General
