18
Selecting Drum Pattern Settings
Selecting Alternate Sounds for the Kick/Snare
The following table shows the alternate kick and snare sounds available for each drum kit:
Drum Kit
ALT Button (Groove/Kit)
LED Off LED Green
E-POP Electronic-Pop Kick 1 and Snare 1 Electronic-Pop Kick 2 and Snare 2
BRUSH Brush Kick and Snare Brush Kick and Tambourine
PERCUSSION Low Timbale and High Timbale Percussion Kick and Snare
POWER Power Kick 1 and Snare 1 Power Kick 2 and Snare 2
CLEAN Clean Kick and Snare Clean Kick and Sidestick
To select alternate sounds for the kick and snare:
1. Select the song part using the VERSE, CHORUS, or BRIDGE button.
2. Press the ALT button next to the GROOVE/KIT encoder to toggle between the options listed in the table
above.
3. Repeat for other song parts, if desired.
To Next Page
Loading...
