To Next Page

To Previous Page

Using an FS3X Footswitch

FS3X

Mode

Hold While

Connecting

FS3X Control

Footswitch 1 Footswitch 2 Footswitch 3

Direct Part

FS3X

Footswitch 3

Select Verse/Play Fill: Press

to switch to the verse. If the

verse is already selected and

playing, press to play a fill.

Select Chorus/Play Fill:

Press to switch to the

chorus. If the chorus is

already selected and

playing, press to play a fill.

Select Bridge/Play Fill:

Press to switch to the

bridge. If the bridge is

already selected and

playing, press to play a fill.

Temporary Mute: During

playback with the verse

part selected, press and

hold to temporarily mute

the drums. Once the

FOOTSWITCH is released,

a fill will be played and the

drums will play normally at

the start of the next bar.

Temporary Mute: During

playback with the chorus

part selected, press and

hold to temporarily mute

the drums. Once the

FOOTSWITCH is released,

a fill will be played and the

drums will play normally at

the start of the next bar.

Temporary Mute: During

playback with the bridge

part selected, press and

hold to temporarily mute

the drums. Once the

FOOTSWITCH is released,

a fill will be played and the

drums will play normally at

the start of the next bar.

Tap Tempo and

Metronome on/off: With

playback stopped, tap

repeatedly to select the

verse and tap in the tempo

(if the verse part is empty,

the metronome will turn

on). Press and hold to turn

the metronome on/off

(verse part must be empty).

Tap Tempo and

Metronome on/off: With

playback stopped, tap

repeatedly to select the

chorus and tap in the

tempo (if the chorus part is

empty, the metronome will

turn on). Press and hold to

turn the metronome on/

off (chorus part must be

empty).

Tap Tempo and

Metronome on/off: With

playback stopped, tap

repeatedly to select the

bridge and tap in the

tempo (if the bridge part is

empty, the metronome will

turn on). Press and hold to

turn the metronome on/

off (bridge part must be

empty).

To change the FS3X mode:

1. With the SDRUM powered on and fully booted, unplug the FS3X from the SDRUM if it is currently plugged

in.

2. Press and hold the FS3X FOOTSWITCH corresponding to the desired mode (see the previous table).

3. While holding the FOOTSWITCH, plug the FS3X into the FS3X IN jack. Keep holding the FOOTSWITCH for

~2 seconds after plugging in the FS3X before releasing it.

4. The SDRUM will now use the new FS3X mode.

Type	Drum Machine Pedal
Tempo Range	40-240 BPM
Inputs	1 x 1/4" (Instrument)
Power Supply	9V DC
Weight	1 lb
Controls	Tempo, Level, Kit
Footswitches	2 x footswitches
Presets	36

DigiTech SDRUM User Manual

Table of Contents

Questions and Answers:

DigiTech SDRUM Specifications

Related product manuals