52
The default CC numbers and how they are used as effect groups on
the Valve FX are as follows:
CC # Function Control One Patch #
21 Compression On / Off 6
22 Distortion On / Off 7
23 Modulation/Pitch On / Off 8
24 Delay On / Off 9
25 Reverb On / Off 0 (10)
The Control One foot controller setup is defaulted to use these CC
numbers as its CC toggle assignments. All of the factory Programs
use these same CC numbers (along with CC 4 for the continuous con-
troller pedal) to control these various Parameters in an organized fash-
ion.
DISPLAY CCs This is a simple option that allows you to see the CC values change in
real time. When this Parameter is set to
Yes
, the CC response time
is slowed slightly, making it useful for troubleshooting MIDI CC prob-
lems (for quickest response time, this Parameter should be set to
No
).
Also, when this option is enabled, any CC activity will cause the Valve
FX to automatically jump to the first Parameter screen of the values
being controlled. To display CCs, the procedure is as follows:
• After entering the MIDI setup menu, press the <RIGHT> Cursor
key twice. The display reads:
• To change the setting, press Function key 2 until the display
shows the setting you want. When you’re finished, press the
<UTILITY> button once to return to your original position in the
Program.
BULK DUMP This option allows you to dump a copy of the entire contents of the
Valve FX memory out the MIDI port. This is particularly useful for
backing up the memory of the Valve FX, or for copying all the
Programs from one Valve FX to another. The procedure is as follows.
• Connect the MIDI Out of the Valve FX to the MIDI in of another
Valve FX, computer, or external System Exclusive recording
device.
• After entering the main MIDI menu, press the <RIGHT> Cursor
key three times. The display reads:
¡Bulk Dump
≤™Program Dump ≥
¡CC Assignments
≤™Disp CC's:No ≥
Section 5 - The Utility Menu
Valve FX Owner’s Manual
To Next Page
Loading...
Need help?
General
