Digittrade High Security HS128 User Manual

English
11
After you have activated the DIGITTRADE HIGH SECURITY HDD success-
fully and inserted a valid Smart Card the keypad will be lighted and the
HDD is ready for PIN entry.
Now you can enter the 8-digit PIN.
The preset factory PIN is “1-2-3-4-5-6-7-8”, after you entered the PIN,
press the “Enter” button.
PIN Entry
Note: To guarantee a maximum security it is obligatory to change the
standard PIN (see page 39). Additionally it is advisable to use different PINs
for the two different Smart Cards.
After successful PIN entry the DIGITTRADE HIGH SECURITY HDD will be
identied by the system as a removable medium and the lighting of the
keypad disappears.
The access is enabled and the Smart Card can be removed.
If a wrong PIN was entered, the “ERROR” LED ashes. Press the “ESC”
button to restart the PIN entry.
Note: After PIN was entered eight times incorrectly, the Smart Card will be
irrevocably locked and cannot be used anymore.

Digittrade High Security HS128 Specifications

General

Brand	Digittrade
Model	High Security HS128
Category	Storage
Language	English