Digittrade High Security HS128 User Manual

English
5
The two-factor authentication works according to the
“Having and Knowing Method”:
Factor 1 (Having): veries, if the user has a Smart Card with the correct
AES key.
Factor 2 (Knowing): veries, if the user knows the correct 8-digit PIN and
consequently is authorized to use this Smart Card.
The Smart Card will be locked forever and disabled automatically if the
8-digit PIN was entered wrongly 8 times. Data stored on the Smart Card
will be destroyed irrevocably.
The embedded 2.5” SATA hard drive makes the mobile data safe small and
handy. Thanks to data transfer and power supply using USB or FireWire
and the hard ware encryption it is possible to use this storage medium
independent of an operating system or platform.
- maximum protection and mobility for all stored data
- two-factor authentication using Smart Card and PIN (8-digit)
- AES hardware cipher engine ( 128/256 bits)
- full disk encryption: every byte and sector is encrypted
- maximum protection against unauthorized access
- portable 2,5” enclosure
- operating system independent
- bus interface USB 1.1 / 2.0 and FireWire
- no performance degradations of reading and writing speed
The benets of DIGITTRADE HIGH SECURITY HDD

Digittrade High Security HS128 Specifications

General

Brand	Digittrade
Model	High Security HS128
Category	Storage
Language	English