Digittrade High Security HS128 User Manual

English
12
Follow these steps to change the PIN of your Smart Card :
1) Insert the Smart Card into DIGITTRADE HIGH SECURITY HDD
(see page 37).
2) Press the “CHANGE PIN” button and afterwards the “1” button.
3) Conrm the entry with “ENTER”. The “STATUS” LED will ash four
times.
4) Enter the current 8-digit PIN and press “ENTER” to conrm the entry.
5) Enter the new 8-digit PIN and press again “ENTER” for conrmation .
6) Enter the new conrmed 8-digit PIN again and press “ENTER”.
After a successful PIN change, the Status -LED will ash four times and
you will hear two beeps. The DIGITTRADE HIGH SECURITY HDD will be
identied by the system as a removable medium and the lighting of the
keypad disappears.
The access is enabled and the Smart Card can be removed.
If the PIN change was not sucessful, the “ERROR” LED will ash. Press
the “ESC” button and start again with the rst step of the PIN change.
Changing the PIN
Note: The DIGITTRADE HIGH SECURITY HDD only accepts 8-digit PINs.

Digittrade High Security HS128 Specifications

General

Brand	Digittrade
Model	High Security HS128
Category	Storage
Language	English