User Manual
method on Port-based VLAN. It will create 13, 14, 15 or 16 Port-
based VLAN groups.
Fig. 4-5 Select VLAN Mode
Fig. 4-6 Metro mode
4-2-4. VLAN Group Configuration
Function name:
VLAN Group Configuration
Function description:
It shows the information of VLAN Groups, and allows administrators to
maintain them by modifying and deleting each VLAN group. User also can add
a new VLAN group by inputting a new VLAN name and VLAN ID.
If you are in port-based VLAN, it will just show the ID、Member of the existed
port-based VLAN group. If you are in tag-based VLAN, it will show the ID、
VID、Member of the existed tag-based VLAN group. The switch can store the
configuration of port-based VLAN and tag-based VLAN separately. When you
choose one of VLAN mode, the switch will bring you the responded VLAN
configuration which keeps the default data. You can easily create and delete a
VLAN group by pressing <Add> and <Delete> function buttons, or click the
Group ID directly to edit it.
Parameter description:
ID (Group ID):
When you want to edit a VLAN group, you must select the Group ID field.
Publication date:September, 2007
Revision A3
57
To Next Page
Loading...
