63
6. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture,
Select Custom, Click Settings button, and click Next.
7. In the Configure Standard TCP/IP Port Monitor box as shown in the following picture,
select LPR form Protocol, type in a queue name, e.g. lp1 for port-1, lp2 for port-2 and lp3
for port-3 of print server.
8. Click OK, and Next.
Note: Please DO NOT type any other name than lp1, lp2 and lp3 in this step.
To Next Page
Loading...
