21
3.1.4 Make a copy of existing profile
If you need to make a copy of a specific profile, you can use this function. This
function is very convenient when you need to build a new profile which parameters are
similar to any existing profile.
To do this, select an existing profile, then click ‘Duplicate’ button.
You’ll be prompted to input a profile name, please use an identical name that does not
exist in profile list.
3.1.5 Set as default profile
If you wish to use a specific profile as default connection, you can select a profile in
the list, and click ‘Set Default’. Selected profile will become default selection and
Client configuration utility will attempt to connect to selected access point.
To Next Page
Loading...
Need help?
General
