35
4.4 Internet Connection Sharing (ICS)
In this page, you can assign a network card on your computer as the path for all
wireless clients to get connected to Internet.
If you have only one network card (except this software access point), you don’t have
to select network card here; if you have more than one network card, select the one
you wish to be used as Internet gateway.
Click ‘Apply’ to save changes (‘Apply’ is grayed out when no changes are made in
this page).
CHAPTER 5: Troubleshooting
If you encounter any problem when you’re using this wireless network card, don’t
panic! Before you call your dealer of purchase for help, please check this
troubleshooting table, the solution of your problem could be very simple, and you can
solve the problem by yourself !
Scenario Solution
I can’t find any
wireless access
point / wireless
device in ‘Site
Survey’ function.
1. Click ‘Rescan’ for few more times and see if you can find any
wireless access point or wireless device.
2. Please move closer to any known wireless access point.
3. Ad hoc’ function must be enabled for the wireless device you
wish to establish a direct wireless link.
4. Please adjust the position of network card (you may have to
move your computer if you’re using a notebook computer) and
click ‘Rescan’ button for few more times. If you can find the
wireless access point or wireless device you want to connect
by doing this, try to move closer to the place where the
To Next Page
Loading...
Need help?
General
