36
wireless access point or wireless device is located.
Nothing happens
when I click ‘Open
Config Utility’
1. Please make sure the wireless network card is inserted into
your computer’s USB port.
2. Reboot the computer and try again.
3. Remove the card and insert it into another USB port.
4. Remove the driver and re-install.
5. Contact the dealer of purchase for help.
I cannot establish
connection with a
certain wireless
access point
1. Click ‘Add to Profile’ for few more times.
2. If the SSID of access point you wish to connect is hidden
(nothing displayed in ‘SSID’ field in ‘Site Survey’ function),
you have to input correct SSID of the access point you wish to
connect. Please contact the owner of access point to ask for
correct SSID.
3. You have to input correct passphrase / security key to connect
an access point with encryption. Please contact the owner of
access point to ask for correct passphrase / security key.
4. The access point you wish to connect only allows network
cards with specific MAC address to establish connection.
Please go to ‘Status’ menu and write the value of ‘MAC
Address’ down, then present this value to the owner of
access point so he / she can add the MAC address of your
network card to his / her access point’s list.
The network is slow
/ having problem
when transferring
large files
1. Move closer to the place where access point is located.
2. There could be too much people using the same radio
channel. Ask the owner of the access point to change the
channel number.
Please try one or more solutions listed above.
Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the requirements
of Directive 1999/5/EC and the Directive 2011/65/EC for RoHS compliance. The complete declaration
of conformity can be requested by post under the below mentioned manufacturer address.
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
To Previous Page
Loading...
Need help?
General
