11
7. Connection Instruction
The wireless HDMI extender kit includes one transmitter and one
receiver, which are paired before shipment. Normally you don’t need
to pair them again.
However, if you buy additional receiver, you need to follow the
instruction below to pair the new receiver with the transmitter.
1) Power on transmitter (if necessary, deactivate already paired
receivers beforehand, disconnect them from the power supply)
2) Power on the receiver until it’s on the main menu.
3) Press the receiver’s reset button and hold for 5 seconds until the
LED is flashing fast.
4) Wait around 30 seconds, the transmitter and receiver will pair
automatically.
To Next Page
Loading...
Need help?
General
