4
2. Introduction
The 4K Wireless HDMI KVM Extender Set transfers your HDMI video
and audio signals in UHD 4K/30 Hz without a cable over a distance of
up to 150 m (unobstructed view). This consists of a transmitter and
receiver unit. Thanks to KVM functionality, the mouse/keyboard can
be connected to the receiver unit, which makes it possible to control
the signal source directly on the output device. Using the HDMI loop-
out to the transmitter unit, a local monitor can be connected in order
to control the output to the receiver. The Extender Set can be
extended on up to 4 screens (output devices) - additional receiver
available separately: DS-55329.
3. Main Features
• Wireless HDMI signal transmission up to 150 m (with
unobstructed view)
• Point-to-multipoint connection - 1x transmitter (source) + up to
4x receivers (output device)
• Additional receiver units available separately: DS-55329
• Supports wireless AV signal transmission with resolutions up to
4K UHD (2160p / 30 Hz)
• Easy operation and handling thanks to Plug & Play - Just plug in
and get started, no driver or software required
• Touch Screen Back Control - Supports touch screen panels (via USB
connection on the receiver)
• Power supply via USB-C connection + power adapter (included)
• AES 128 bit encryption
• WPA2 protocol
• HDMI 2.0 / HDCP 2.2
To Next Page
Loading...
Need help?
General
