Digitus DS-55328 User Manual

13
LED indicator of TX
Description
Red
TX system is booting on
Blue
Connected
Purple
No video input signal
8.2 Connecting the receiver
1. Connect the power adapter to the connector marked "5V" and
insert the plug into the wall socket.
2. Place the receiver in the room (bedroom, study, or other room)
where you want to connect the second TV or projector.
3. Use an HDMI cable to connect your TV or projector to the
HDMI port marked “HDMI® OUT” on the receiver.
LED indicator of RX
Description
Flashing blue
Waiting for connection
Static blue
Connected

Digitus DS-55328 Specifications

General

Brand	Digitus
Model	DS-55328
Category	Extender
Language	English