EasyManua.ls Logo

DIHR LP3 S Plus - Disposal; Environmental Aspects; Packaging; Signals and Alarms

DIHR LP3 S Plus
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
page 35
7.3.4 Start-up
At installation engineer’s care.
8. SIGNALS AND ALARMS
The alarm messages are displayed, based upon their meaning.
When displaying "DETERGENT LEVEL" add detergent in the detergent tank (only with
optional "Sensor for Chemicals Low Level").
When displaying "RINSE-AID LEVEL" add rinse-aid chemical in the rinse-aid tank (only
with optional "Sensor for Chemicals Low Level").
When displaying "DOOR OPEN" means that the open door does not allow the maneuver
tried, or a wash cycle was in progress, when lifting the door.
9. ENVIRONMENTAL ASPECTS
9.1 Packaging
Packaging is made of the following components:
a wooden pallet;
a nylon sack (LDPE);
a multi-layer carton;
polystyrene (PS) strips;
polypropylene (PP) banding.
All above materials, shall be disposed and treated in accordance with the Local Laws in force.
9.2 Disposal
The symbol WEEE/RAEE used on this product indicates that it cannot be treated as domestic
waste. Proper disposal of this product contributes to protecting the environment. For more
information on product recycling, contact the local authorities, domestic waste authorities
or the dealer where the product was purchased.
For product or parts disposal, follow the Council directives 2011/65/UE and 2012/19/UE as
amended and/or application legislative decrees.
The present product or parts cannot be disposed of as urban waste but shall be collected
in separate containers (see the waste bin on wheels symbol with an “X” on the product).
At the time of product disposal, the user shall refer to the waste electrical and electronic
equipment (WEEE/RAEE) specifi cation.
The manufacturer guarantees the absence of dangerous substances in the EEA used in
conformity to the directive 2011/65/UE.
If the user does not comply with the regulations he/she shall be subject to the penalties
foreseen by each member state.
TYPE OF ALARM CAUSE
REMEDIES
REMEDIES
B1 BOILER NOT FILLED
Open the water supply valve and verify a proper water
supply fl ow. Contact Technical Service
B2 BOILER SENSOR FAILURE
Contact Technical Service
B3 BOILER NOT HEATED
Contact Technical Service
B4 FAILURE IN RINSING
Contact Technical Service
B5 BOILER OVERTEMPERATURE
Contact Technical Service
E1 WASH-TANK NOT FILLED
Open the water supply valve.
Contact Technical Service
E2 WASH-TANK SENSOR FAILURE
Contact Technical Service
E3 WASH-TANK NOT HEATED
Contact Technical Service
E5 WASH-TANK OVERTEMPERATURE
Contact Technical Service
E6 TANK DRAINING FAILURE
Check the overfl ow pipe. Contact Technical Service
E7 WASH PUMP THERMAL RELAY 1
WASH PUMP THERMAL RELAY 2
Contact Technical Service
Table 3
?

Table of Contents