Need help?Do you have a question about the Dillenger KT-LCD3 and is the answer not in the manual?
General| Brand | Dillenger |
|---|---|
| Model | KT-LCD3 |
| Category | Measuring Instruments |
| Language | English |
Physical dimensions of the meter display unit.
Dimensions for mounting the dual bracket.
Physical dimensions of the button control box.
Describes the primary material and color options.
Illustrates the electrical connections for the meter.
Details the various elements displayed on the meter screen.
Instructions for powering the meter on and off.
Explains the default startup display and its configurations.
Describes how battery level is shown on the display.
Explains how to adjust power assist levels.
Details the 6Km/H power assist feature for takeoff.
Explains how to activate and use the cruise control feature.
Instructions for controlling the backlight and headlights.
Describes display of motor power and temperature feedback.
Explains the display of the surrounding environment temperature.
How to clear single trip data (TM and DST).
Describes how fault codes and warnings are displayed.
How to set the maximum riding speed limit.
Procedure for configuring the wheel diameter setting.
Setting preference for metric or imperial units.
Setting motor gear reduction ratio and rotor magnets.
Configuring the wheel speed pulse signal for the meter.
Adjusting power assist control based on throttle and PAS gear ratio.
Controls throttle activation behavior on startup.
Configures power monitoring mode (real-time voltage or smart power).
Configures throttle startup, motor phase, power assist, and handlebar functions.
Adjusts current, brightness, cruise function, and temperature display.
Manages password, defaults, attributes, voltage, brakes, and assist tuning.
To Next Page