30
The C14 parameter setting will display on the meter after C13 settings. The KT-LCD3 will
display as follows:
C14 Power Assist Tuning Setting
C14 Value Assist Strength of Pedal Assist
1 Weaker
2 General
3 Stronger
C14 Display
C14 is the parameters for power assist tuning. The default value is 2. Refer to the
PARAMETER COPY
of any KT-LCD3 meter can be copied to another KT-LCD3 meter. This can be done via
Meter Parameter Copy Wiring Diagram
To Next Page
Loading...