12 EDXtreme User Instructions
2.1.1 EDX Keys
There are four “hard” keys and four “soft” keys. The hard keys are permanently labeled
and the soft keys are just below the display. The soft key functions change and the key
label appears above each key on the display. Sometimes the individual soft keys are
referred to as the F1, F2, F3 and F4 keys as numbered from left to right.
2.2 EDXtreme Connector
The connector on the EDXtreme is recessed for protection. It is used to connect the
instrument to a Communicator remote display/controller, printer, PC or external power
supply. See your Dillon distributor for details.
Figure 2.2 EDXtreme Connector
On/Off key Use this key to turn the unit on and off.
ZERO key Use this key to zero the force indicated on the display.
ESC key
Use this key to escape from portions of the menu structure and
return to previous choices or displays.
Arrow key
Use this key to access any available soft keys not currently
viewed.
To Next Page
Loading...
