Dimplex BF33STP User Manual

10 www.dimplex.com
1. Remove the 2 mounting
screws from the air lter
bracket.
2. Slide forward to remove the
air lter bracket assembly
from the rebox.
3. Slide lter out of air lter
bracket.
4. Reassemble in reverse order
as above.
!
NOTE: If after market air
lter is used ensure it is installed
according to the manufacturers
recommended instructions.
Maintenance
Purire™
Filter
Filter
Bracket
Mounting
Screws
Figure 6
Partially Reective Glass
Cleaning
The partially reective glass is
cleaned in the factory during
the assembly operation. During
shipment, installation, handling,
etc., the partially reective glass
surface may collect dust particles.
These can be removed by bufng
lightly with a clean dry cloth.
To remove ngerprints or other
marks, the partially reective
glass can be cleaned with a damp
cloth using high quality house-
hold glass cleaner. The partially
reective glass should be com-
pletely dried with a lint free cloth.
To prevent scratching, do not use
abrasive cleaners or spray liquids
on any surface.
Fireplace Surface Cleaning
Use warm water only to clean
painted surfaces of the Compact
Fireplace. Do not use abrasive
cleaners.
Servicing
Except for light bulb replacement
and cleaning described above, an
authorized service representative
should perform any other servicing.

Dimplex BF33STP Specifications

General

Brand	Dimplex
Model	BF33STP
Category	Indoor Fireplace
Language	English