How to fix Dimplex Indoor Fireplace flame frozen?
To fix a frozen flame in your Dimplex Indoor Fireplace, first check for a defective flicker motor and replace it if necessary. Also, inspect the wiring connections for any looseness and correct them.
Why does my Dimplex Indoor Fireplace heater emit an odor?
A Dimplex Indoor Fireplace heater may emit an odor due to normal operation, particularly when initially turned on. This occurs as the heater burns off dust accumulated during manufacturing or operation. However, a defective heater assembly can also cause this issue, requiring a replacement.
Why is my Dimplex Indoor Fireplace flame not bright?
If the flame in your Dimplex Indoor Fireplace is not bright or not visible, it could be due to burnt light bulbs, so replace them. Loose wiring could also be the cause; check the wiring connections. A defective light harness might also be the problem, so replace the light harness if necessary.
Why does my Dimplex Indoor Fireplace unit turn on and off by itself?
Your Dimplex Indoor Fireplace might be turning on and off by itself because the remote control has a similar frequency to other remotes in the area; try replacing the remote control. Radio frequency disturbance from outside sources could also be the reason; in this case, replace the remote control and the Remote Control Receiver Kit, where necessary. A defective Remote Control Receiver could also be the culprit; replace the Remote Control Receiver.
What to do if my Dimplex Indoor Fireplace is making excessive noise with the heater on?
If your Dimplex Indoor Fireplace is making excessive noise when the heater is on, it could be due to a dirty blower assembly. Make sure that the exterior intake louvers and firebox cavity are free of dirt and dust. Another potential cause is a defective heater motor, which would need to be replaced.
Why is my Dimplex Indoor Fireplace heater not turning on?
If the heater on your Dimplex Indoor Fireplace isn't turning on, it could be due to several reasons. It might be due to improper operation. Check for loose wiring in the unit. A defective heater switch or a defective remote control receiver (if applicable) could also be the cause. In such cases, replace the heater switch or the remote control receiver kit.
Why is my Dimplex Indoor Fireplace heater turning off after a couple of minutes?
The Dimplex Indoor Fireplace heater might be turning off after a couple of minutes due to a build-up of dirt/dust in the heater assembly. Ensure that exterior intake louvers and the firebox cavity are free of dirt and dust. Alternatively, the heater assembly could be defective. Replace the heater motor if it's not running when heat is activated, or replace the heater elements if the motor is running but heat isn't coming out.
What to do if my Dimplex Indoor Fireplace heater is not turning off?
If your Dimplex Indoor Fireplace heater is not turning off, it might be due to improper operation of the unit. It can also be caused by improper operation of the Thermostat/Wall Controls (if applicable). Another cause may be a defective heater on/off switch, so consider replacing it. Finally, the heater assembly could be defective and needs replacement.
Electrical schematic for Mod 0-B configurations (with/without remote).
Electrical schematic for Mod C-E configurations.
Detailed steps for rewiring from 208/240V to 120V with remote controls.
Detailed steps for rewiring from 208/240V to 120V without remote controls.
General| Model | BF36ST |
|---|---|
| Type | Electric Fireplace |
| Style | Traditional |
| Heating Capacity | 400 sq. ft. |
| Volts | 120V |
| Watts | 1500W |
| Flame Brightness Adjustment | Yes |
| Thermostat | Yes |
| Remote Control | Yes |
| Timer | Yes |
| Color | Black |
| Width | 36 inches |
| Heat Settings | High/Low |
| Material | Metal, Tempered Glass |
To Next Page
