To Next PageTo Next Page
Need help?Do you have a question about the Dimplex SOLCU and is the answer not in the manual?
Guidelines for the correct and intended use of the temperature difference controller.
Identifies risks associated with installation and commissioning of the controller.
Procedures and steps for identifying and troubleshooting system faults.
Information on limiting the hot water temperature using a mixer.
Instructions for proper disposal of the controller according to regulations.
Manufacturer's disclaimer regarding installation, operation, and usage.
Description of the modes selectable via the operating switch.
Explanation of the functions of the controller's operating buttons.
Guidance on diagnosing and resolving problems with the controller and system.
Explanation of various display messages and their meanings.
Checks for conflicting settings and associated error codes.
Specifications, performance data, and parameters of the controller.
General notes and remarks.
Scope of the manual for installation, commissioning, operation, and dismantling.
Defines who is qualified to install, commission, and use the controller.
Explanation of warning notices, danger levels, and other symbols used.
Step-by-step guide on how to open and close the controller's casing.
Instructions for securely mounting the controller to the installation site.
Guidance on preparing the device for cable entry from rear or lower side.
Instructions for connecting protective conductors, sensors, and other cables.
Details on connecting the power supply to the controller terminals.
Information on connecting temperature sensors and pulse generators.
Details on connecting Output R1, including TRIAC and RPM control.
Details on connecting Output R2, a switched or potential-free output.
Procedure for selecting the controller's display language.
Steps to set the current time on the controller.
Selecting the appropriate system group for the solar energy system.
Choosing the specific solar energy system configuration.
How to switch off all controller outputs and the system.
Enabling automatic operation of the controller for normal system use.
Using manual mode for testing and controlling outputs directly.
Adjusting the controller's time settings.
Overview and selection of different solar energy system configurations.
Steps to select, activate, or deactivate controller functions.
Setting up time-based control for the circulation pump.
Setting up temperature-based control for the circulation pump.
Setting up pulse-based control for the circulation pump.
Configuring temperature inputs and limits for back-up heating.
Setting up time-based control for the back-up heating function.
Configuring inputs and temperature differences for solid fuel boiler operation.
Setting input and switch-on/off temperatures for the quick charge function.
Configuring flow rate measurement methods and glycol proportion.
Assigning temperature sensors for heat quantity calculation.
Setting the input and defining the 'on'/'off' temperature values.
Setting up time-based control for the thermostat function.
Setting temperature inputs and 'on'/'off' switching values.
Setting maximum and minimum limits for the heat source.
Setting the maximum limit for the heat target.
Setting up time-based control for the difference thermostat.
Defining specific time periods for the function's operation.
Configuring time windows, interval time, and test duration.
Enabling or disabling the stagnation reduction feature.
Setting the minimum temperature for storage tank unloading during holidays.
Enabling or disabling the frost protection feature.
Selecting storage tank and temperature sensor for display.
Explanation of error types that trigger the alarm output.
Procedure for accessing and modifying controller parameters.
Choosing between temperature differential and target temperature control.
Activating, deactivating, and setting minimum speed for RPM control.
Steps to access the storage priority settings.
Enabling or disabling the storage priority feature.
Defining the first and second priority storage tanks.
Navigating through various status displays of sensors, outputs, and functions.
Common problems, their possible causes, and recommended procedures for resolution.
Troubleshooting issues related to solar pump operation and cycle behavior.
Details on output power ratings and fuse specifications.
General| Brand | Dimplex |
|---|---|
| Model | SOLCU |
| Category | Temperature Controller |
| Language | English |
