Parker pre-filter-draining water
(1) Joystick
(2) Filter cartridge
(3) Pump fuel supply
(4) Fuel tank inlet
(5) Plug
(6) Drainage cap
1 Stop the engine.
2 Place a suitable container.
3 Slacken the drainage screw.
4 Drain the liquid until the pure diesel fuel
starts flowing out.
5 Fit the drainage cap by applying a
tightening torque of 3.5～4 Nm.
B-6 Turret rotation slewing ring
gear - Lubrication
Lubricate both the turret axial bearing tracks
by means of the two grease nipples provided
inside. Lift the primary telescopic boom for
access into the slewing ring gear, inject a
number of shots of grease and move the turret
to distribute the grease uniformly.
Lubricate the outer teeth of the slewing ring
gear. Apply grease manually using a brush.
Ensure that the grease is distributed uniformly.
Remove grease buildup.
Anyone in the follow table should be
chosen when the vehicle is used in the
normal environment.
If the machine is used in the severe
environment, refer to DingLi for the grease.
To Next Page
Loading...
