5
2. INSTALLATION
2.1 UNPACKING
Carefully remove your scale and each of its components from the package. Save the packaging to ensure safe storage and
transport.
2.2 SELECTING THE LOCATION
Locate the scale on a firm, steady surface. Avoid locations with excessive air current, vibrations, heat sources, or rapid
temperature changes.
2.3 LEVELING THE SCALE
Before the scale is used, the feet should be adjusted, in order for the instrument to be levelled with the surface. This will
enable accurate weighing. A bubble level indicator can be found in a small extractable round window, on the side of the
scale. Level the scale by adjusting the leveling feet until the bubble is centered in the circle, as seen below.
Scale Level
2.4 CONNECTING POWER
2.4.1 AC Adapter
Connect the AC Adapter to the wall outlet. Connect the plug into the lower part of the indicator.
2.4.2 Turning Power On and Off
Press the On/Zero button to turn power on.
The scale then displays the last selected application mode.
To turn power off, press and hold the Off button until OFF is displayed; then release the button.
To Next Page
Loading...
Need help?
General
