17
1-800-634-7328 DirectSupply.com
Maintenance
Safety Inspection Checklist
Prior to providing the resident lift to a new user, a full product inspection is required. Regular cleaning
is essential to smooth operation and extending the life of the resident lift. This will also reveal loose or
worn parts that must be replaced.
To keep your resident lift in service, follow the maintenance procedures in this manual.
Casters and brakes should be cleaned and lubricated, and the axle and swivel bolts should be
checked for tightness. Remove all debris from the wheel and swivel bearings. Replace worn parts
immediately. Do not use the lift if you suspect any component is damaged or worn.
Maintenance Safety Inspection Checklist
Regular cleaning will reveal loose or worn parts, enhance smooth operation and extend the life
expectancy of the lift.
Follow the maintenance procedures described in this manual to help keep your resident lift in
continuous service.
Item Initially
Inspect/Adjust
Monthly
The Caster Base
Inspect for missing hardware X X
Base opens/closes with ease X X
Inspect casters and axle bolts for tightness X X
Inspect casters for smooth swivel and roll X X
Inspect and clear wheels of debris X X
Inspect pivot joints for wear X X
The Mast
Mast MUST be securely assembled to boom X X
Inspect for bends or deflections X X
Inspect pivot joints for wear X X
The Boom
Check all hardware and hanger bar supports X X
Inspect for bends or deflections X X
Inspect bolted joints of boom for wear X X
Inspect to ensure the boom is centered between
the base legs
X X
Check the mast pivot bolt under the rubber boot;
ensure the bolt is tightly secured
X X
Inspect pivot joints for wear X X
To Next Page
Loading...
