EasyManua.ls Logo

Directed Electronics ProSecurity RK20 - Timer Mode

Directed Electronics ProSecurity RK20
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
49
© 2008 Directed Electronics. All rights reserved.
Timer mode
By pressing the remote

and

buttons simultaneously the parking lights will
flash 4 times and then start the vehicle and run for the set duration. The remote
engine start can be shut off by the transmitter by pressing the remote engine start
button and remain in timer mode, but if any other shut down zones or the
ignition .
Press Timer mode buttons.1.
The vehicle will confirm with 4 parking light flashes.2.
A 1-second delay will start.3.
The system will start the car and will run for the specified duration, unless 4.
shut down by the remote engine start button (or the +/- input).
The system will start every 3 hours until canceled by the brake, hood, or 5.
neutral safety shut-down wires (a maximum of 6 times).
Important! Timer Mode should be used only in open areas. Never start and run
the vehicle in an enclosed space such as a garage or carport

Related product manuals