Directed 535T - 4 Window Wiring Diagram; Type A Systems Description

© 2013 Directed. All rights reserved. 17
4 Window Wiring Diagram
H3/3 Gray/Red (-) Stop input
H3/4 Gray/Black (-) Delay input
H3/5 Brown (-/+) Siren trigger up input
H3/2 White/Black Pass rear window up switch side
H3/1 White Pass front window up switch side
H2/5 Gray (-) Ground while active 500mA current output
H2/1 Brown Driver Up Switch
H2/7 White/Black Not Used
H2/6 Brown/Black Not Used
H2/3 Red/White (-) Auxiliary Input
H2/4 Orange (-) Ground when armed input
H2/2 White Driver Down Switch
H2
H3
H1
Type A Systems (Description)
The window switch outputs rest at ground. When the switch is not being used, both wires will
show ground when tested. One wire is connected to (+) 12V when the switch is in the up position,
and the other is connected to (+) 12V when the switch is in the down position. This is the most
common type for Domestic and Asian vehicles.