4 © 2013
Directed. All rights reserved.
535T Window Automation System
The 535T window automation system controls the operation of 2 windows in both directions or
4 windows in 1 direction. The 535T automatically rolls up the power windows when the security
system is armed, as well as providing “one-touch” operation from the vehicle window switch in
either direction. The 535T can also be used to vent or roll the windows down with an auxiliary
channel from the security system.
NOTE: One-touch and vent functions do not work in 4 window mode. One-touch function is not compat-
ible with vehicles that vent the window upon opening a door. This feature is typical on most convertibles
or coupes such as the Nissan 350Z, Ford Mustang, or BMW Z series.
Operating Instructions
To roll the windows up:
Simply arm the vehicle security system, the windows will roll up
completely.
To arm the security system and leave the windows down:
1. Press the auxiliary channel that is controlling the down function.
2. Within 5 seconds arm the security system.
3. The security system will arm, but the windows will remain down.
To vent the windows (not available in 4 window mode):
At any time, press and release the auxiliary channel of the security
system and the windows will vent to the programmed setting.
To roll the windows down (not available in 4 window mode):
At any time, press and hold the auxiliary channel of the security
system for 3 seconds, the windows will vent and then continue to roll
down.
NOTE: If using a delayed auxiliary channel from the security system, such as trunk release, to control
the windows down operation, the transmitter button will have to be pressed for 1.5 seconds to vent the
windows and 4.5 seconds to roll the windows all the way down.
To activate “one-touch” operation (not available in 4 window mode):
1. Turn on the ignition.
2. Simply tap the vehicle window switch in either direction, the window will roll up or down
completely.
To Next Page
Loading...
