Directed 535T - Page 8

© 2013 Directed. All rights reserved. 9
H1/2 GREEN Driver window down motor side
Cut the down (driver) wire at the switch or motor and connect this wire to the motor side of the
wire.
H1/3 BLUE Driver window up motor side
Cut the up (driver) wire at the switch or motor and connect this wire to the motor side of the wire.
H1/4 RED (+) 12V constant, 20A fused
Connect this wire to a constant 12V fused source that is capable of handling a high current draw,
such as the ignition harness or battery.
H1/5 BLACK (-) Chassis ground
Connect this wire to a good ground point in the vehicle (preferably make a ground in the kickpanel
that is closest to the 535T).
H1/6 VIOLET/BLACK Ground path, passenger window motor down
This wire provides a ground path for the passenger window motor down side. Connect this wire
to a good ground point in the vehicle (preferably make a ground in the kickpanel that is closest to
the 535T).
H1/7 GREEN/BLACK Passenger window down motor side
Cut the down (passenger) wire at the switch or motor and connect this wire to the motor side of
the wire.
H1/8 BLUE/BLACK Passenger window up motor side
Cut the up (passenger) wire at the switch or motor and connect this wire to the motor side of the
wire.