25
933.HONDA9 2.03.195.3 2018 Acura ILX (Smart Key)
©2021 VOXX•DEI LLC. All rights reserved.
Module programming for security-only installations
Refer to "LED diagnostics and troubleshooting" for more information and for troubleshooting purposes.
To connect the module:
1
Please ensure that the vehicle is in a safe location and cannot move forward during
programming. For vehicles equipped with a manual transmission, make sure the gearshift
lever is in the neutral position.
2
Connect the 12-pin main power harness to the DS4+ module FIRST. The LED will turn
ON solid blue for 1 second to confirm Bluetooth communication.
Wait until the LED turns ON solid orange before proceeding to the next step.
Must connect
12-pin FIRST
& &
Solid
x1 Sec
Solid
3
Connect the remaining harnesses to the DS4+ module.
Connect
remaining
harnesses
4
Press twice on the Push-to-Start (PTS) button to turn the ignition ON, and wait until the LED
turns OFF.
&
Off
5
Press once more on the PTS button to turn the ignition OFF.
6
Pair remotes (if applicable). For information on how to pair a specific remote, please
refer to its corresponding owner documentation, which can be found inside the product
packaging of the complete system or on www.directechs.com.*
Pair
remotes*
* Your aftermarket remote may differ from the model shown in the illustrations.
You have successfully completed the module programming sequence.
To Next Page
Loading...
