page 32 of 72 ANDIAMO.MC Hardware Guide - Version 2.0
CHAPTER 4: Operation
Remote protocol
To remote control the device different protocols can be applied. Four LEDs at the
front panel inform about the protocol that is currently applied.
This setting may be modifi ed in the system menu - see „System Settings“ on page
42.
LED Code Protocol
DO (DirectOut protocol), USB only*
DO (DirectOut protocol)*
AVID PRE (Pro Tools / S6)*
Yamaha AD8HR (DM-2000, DM-1000)*
SSL - C10, C100, C200*
Lawo Dallis**
* Standard fi rmware
** Dallis fi rmware
Four different methods are available for remote control:
• USB
• Embedded Serial (‘Serial over MADI’)
• Embedded MIDI (‘MIDI over MADI’)
• USB over Ethernet (‘DO.Net’)
The connection methods are explained in the Software Guide for the ANDIAMO
Remote - available at www.directout.eu.
To Next Page