Appendix D - Remote Protocols
Appendix D - Remote Protocols
Overview
ANDIAMO.MC supports various remote control protocols for comfortable use
straight from a mixing console or DAW application.
The objective of this section is to help building a working setup and to inform about
particular peculiarities. Since there are 3rd party devices involved, the information
in this document may be superseded by modifications of hardware or software.
The remote protocol is selected by accessing the system menu at the front panel
of the device - see „Remote protocol“ on page 32.
Depending on the selected protocol the connection method is different.
Code USB Serial over MADI MIDI over MADI Custom MADI
0 DO -- -- --
A DO DO DO --
B (DO)* (DO)* AVID PRE --
C (DO)* Yamaha AD8HR (DO)* --
D (DO)* (DO)* (DO)* SSL
AB** (DO)* (DO)* (DO)* Lawo Dallis
* (DO) in brackets means that, due to the unidirectional control protocol without
status report, settings via device user interface or other remote ports are
restricted.
** AB is used for Dallis remote control and requires a license and different
firmware. The transport method follows the Lawo specification.
DO marks the native protocol which is used by the ANDIAMO Remote.
To Next Page