page 34 of 72 ANDIAMO.MC Hardware Guide - Version 2.0
CHAPTER 4: Operation
Signal Routing
Two methods of signal routing are available:
• ‘Standard Bank Routing’ - signal routing of analog and digital I/Os as a whole.
• ‘Matrix Mode’ - individual signal routing of all analog and digital I/Os on a per
channel basis.
Standard Bank Routing
A block of channels of a MADI stream (Bank) is selected to act as source for the
analog outputs (DA) and destination for the analog inputs (AD). The remaining
MADI data passes the device unchanged. The bank selection is indicated by two
LEDs.
33..64 LED (green): indicates the selection of the converted
audio channels.
LED ON = conversion of audio channels 33 to 64*
LED heartbeat = conversion of audio channels 33 to 64*
delay compensation active**
01..32 LED (green): indicates the selection of the converted
audio channels.
LED ON = conversion of audio channels 01 to 32*
LED heartbeat = conversion of audio channels 01 to 32*
delay compensation active**
* 56 ch mode conversion of channels 01 to 28 or 29 to 56
** see „Delay Compensation“ on page 32
NOTE
MADI @ 2 FS = 32 channels, MADI @ 4 FS = 16 channels
Both portions of the MADI stream are used for A/D input and D/A output - no
selection possible.
To Next Page