104
DIRECTV
®
DVR USER GUIDE
System Setup
Select “Receiver Mode” if you want to use one remote to command a second
DIRECTV
®
Receiver.
Use this option to set up your remote to control 3 or more receivers in one
room.
Certain remote control models feature RF (radio frequency) capability. Refer
to the model number printed on the top left corner of your DIRECTV Remote
Control. Look for the letter(s) “R” or “RB” at the end of the model number,
which indicates that the remote supports radio frequency.
If you have a remote with RF capability you can change the remote’s signal from
Infrared (IR) to RF. While the IR signal requires a clear line of sight to the front
of the receiver, RF signals let you put your receiver inside a cabinet or behind
solid doors and still be able to command it from up to 200 feet away.
Receiver Mode
Advanced Setups
IR/RF Setup
Note: Not all DIRECTV Receivers are RF-capable.
To Next Page
Loading...
